Legit Case Reviews
Cooler Master Storm Sniper Black Mid-Tower Case Review
|Date:||Thu, Mar 05, 2009 - 12:00 AM|
|Written By:||Shane Higgins -|
With the Sniper out of its packing we can get a good look at it. First thing I noticed is the massive amount of open mesh this case has. Getting fresh air in the Sniper is not going to be hard; keeping the noise down, however, is another issue. Quiet components are going to be a must.
Looking straight at the side of the Sniper we can make out supports behind the mesh. This is nice as it should reduce the chance of bending the mesh in.
Moving around to the back we can see the Sniper has a bottom mounted PSU, water cooling tube pass through holes with grommets, side panel pad lock tab, and a security lock for your peripherals that Cooler Master calls "StormGuard."
Looking at the top of the sniper we can see the air intake and the front control panel. The air intake also provides double duty as they are also grab handles for moving the case around. More on this in a minute.
Looking closer at the front panel, we can see the rather large power button, fan speed control knob, eSATA port, four USB ports, E1394 port, and audio ports. We can also get a better view of the top front intake. There is a grill and screen that stops loose change or small metal objects that may find its way into this area from getting into the case. So no worries about ruined hardware from foreign objects... well, other than water.
Looking at the bottom of the Sniper we have yet more vents. The feet of the Sniper are server style feet with a neoprene base to prevent sliding around on smooth surfaces. Now, if this is not your liking Cooler Master also includes a replacement set of standard rubber feet; this also shortens the overall height almost an inch.
Next Page - Moving Inside the Sniper
Page 1 - The Sniper Case
Page 2 - External Impressions
Page 3 - Moving Inside the Sniper
Page 4 - Inside the Sniper Continued
Page 5 - Installing The Hardware
Page 6 - Final Thoughts and Conclusions