Legit Cooling Reviews

Swiftech H20-220 Edge HD Liquid Cooling Kit Review

Manufacturer: Swiftech
Product: H2O-220-Edge-HD-BK
Date: Thu, Feb 09, 2012 - 12:00 AM
Written By: Shane Higgins -
Share:

Looking Closer at the Apogee HD Waterblock


Swiftech Apogee HD waterblock top

The Apogee HD waterblock is different from waterblocks I have used before. Normally a waterblock has two ports, an inlet and outlet. The Apogee HD has four ports, an inlet and 3 outlets. There are also two preinstalled 1/2" fittings.

Swiftech Apogee HD waterblock loop options

With the traditional two port waterblocks (right) the loop would go from one block to the next. With multiple blocks in the loop there would be drop in the flow rate. With the multiple ports on the Apogee HD waterblock there can be parallel loops without the use of Y fittings for a cleaner look. The parallel loops allow for better flow when compared to traditional serial loops. As blocks are added to a loop they add restriction; more restriction lowers flow rate and lower flow rates get higher temps as the coolant cannot carry the heat away fast enough. To get past this in conventional setups some users would use dual pumps.  With the Apogee HD the need for the extra pump is removed.

Swiftech Apogee HD waterblock base

The base of the Apogee HD waterblock is polished to mirror finish.

Swiftech Apogee HD waterblock precision-machined

The base-plate is precision-machined from C110 copper. The thermal design of the cooling engine is characterized by Swiftech's fin/pin. The matrix has been further refined with variable width cross channels to improve flow rate without affecting thermal efficiency, and fabrication quality has also been enhanced to reduce micro machining imperfections.

Swiftech Apogee HD waterblock housing

The housing is precision-machined from black or white polyacetal copolymer. There is also a rubber o-ring for sealing the base to the top.

Swiftech Apogee HD waterblock parts

Included are the backing plates for Intel LGA 775, 1155, 1156, and 1366. There are also two hose clamps and a packet of PK-1 thermal paste.

Swiftech Apogee HD waterblock LGA2011 parts

Also included are hold down screws and springs for Intel LGA2011.

Next Page - Looking closer at the MCR 220 Drive Radiator


Review Index
Page 1 - H20-220 Edge HD liquid cooling kit
Page 2 - Unboxing the H2O-220 Kit
Page 3 - Looking Closer at the Apogee HD Waterblock
Page 4 - Looking closer at the MCR 220 Drive Radiator
Page 5 - Installing the H20-220 Into the Case
Page 6 - Legit Reviews Intel Core i7-3960X Test System
Page 7 - Temperature Testing Results
Page 8 - Final Thoughts