Legit Storage Reviews
OCZ Vertex LE (Limited Edition) 100GB SSD Review
| Manufacturer: | OCZ Technology |
| Product: | OCZSSD2-1VTXLE100G |
| Date: | Sat, Feb 20, 2010 - 12:00 AM |
| Written By: | Nathan Kirsch - |
| Share: |
Inside the Vertex LE SSD
Since we have never seen what components are being used inside the
OCZ Vertex Limited Edition SSD series we opened up our 100GB Vertex LE drive to see what the
internals look like. Breaking the warranty sticker and opening up the drive will VOID your warranty, so don't do this unless you don't mind losing the warranty on an expensive SSD.
After removing the four small Philips head screws that hold down the
Vertex LE (Limited Edition) Series cover we were able to lift off the cover and
see what makes this little SSD tick.
Here is a closer look at the main component side of the PCB where you
can make out eight Intel 34nm MLC NAND Flash memory chips and the highly
anticipated SandForce 1500 controller that is being used on this drive and the Vertex 2 EX SLC series of SSDs. Notice that the controller is now branded as OCZ, but it isn't too hard to figure out who really makes it. The regular Vertex 2 SSDs will
be using the SandForce 1200 controller, which has a build cost that will
be $100 cheaper. Since OCZ has scraped the idea of bringing to market the Vertex 2 Pro it is highly likely that this limited edition drive is basically the inventory of Vertex 2 Pro drives with a slower, but more reliable and stable firmware from what we can gather.
Flipping the PCB over we can take a look at the other side, which is bare and has just eight more Intel MLC NAND memory chips on it. The location of the large 'super capacitor' is present, but you will notice that the Cap-XX is missing in action. We asked OCZ what happened to it and were told the following:
"This
will NOT be present on the consumer class devices Vertex LE, and Vertex 2. This will only be on our enterprise class Deneva product line.
Basically what it's for is in event of a sudden power loss the drive
will go into a mode where it will focus on completing write commands
using the power in the super cap. Its only enough for a short burst, but
it's enough to get the job done. This is important on SSDs more so than
HDDs in enterprise. On an HDD when write caching is turned off, the
last write command is lost, but the rest of your data is secure. On
standard SSDs because of the nature of Flash and Flash management it is
not typically possible to guarantee data integrity on sudden power loss.
The enterprise class Deneva Series will be the first high performance
readily available SSD that guarantees data integrity on sudden power
loss. As a bonus effect the last write does in fact complete so no data
is lost..." OCZ PR
The heart and soul the Vertex LE is the SF-1500 controller seen
above. As we noted, the Vertex LE doesn't have any cache chips on it
as that is because the SandForce controller itself is said to carry a
small cache inside that is a number of megabytes in size. Inside the
controller there's also the Tensilica DC_570T CPU core; this is used in
both the SF-1200 and SF-1500 models. This controller includes support
for all the latest features like native TRIM support. OCZ claims maximum
read/write performance of 270/250 MB/s with their revision 1.0 firmware. This is a more recent firmware build than what we used when we tested the Vertex 2 Pro last week, so it should be interesting to see how these two drives compare.
Next Page - The OCZ Toolbox Utility
| Review Index |
|
Page 1 - OCZ Vertex LE SSD Performance Review
Page 2 - Inside the Vertex LE SSD Page 3 - The OCZ Toolbox Utility Page 4 - The Test System Page 5 - HD Tach v3.0.4.0 Page 6 - HD Tune v4.01 Page 7 - HD Tune v4.01 - Random Access Page 8 - ATTO Disk Benchmark v2.41 Page 9 - SiSoftware Sandra 2010 Page 10 - CrystalDiskMark v3.0 Page 11 - AS SSD Benchmark Page 12 - PCMark Vantage Page 13 - IOMeter Page 14 - Free Capacity and Final Thoughts |
Socialize