Legit Cooling Reviews
Noctua NH-D14 HSF Review - The Best CPU Cooler Ever?
|Date:||Wed, Feb 10, 2010 - 12:00 AM|
|Written By:||Shane Higgins -|
Installing the NH-D14
The NH-D14 comes with everything needed to mount the cooler to your favorite socket. Noctua also includes a long screw driver to reach the mounting screws just in case you don’t have one.
With the NH-D14 installed on my Intel DX58SO motherboard we can start to see that there could be some issues with components clearing.
In Noctua’s FAQ page there is a drawing with dimensions that will help you in measuring your board to see if you will have issues. There is a 44mm clearance from the top of the CPU to the first cooling fin, so modules like the Kingston HyperX T1, that comes in at 60mm in height, won’t work if the RAM slot is under the fins.
Also due to the NH-D14’s girth Noctua also states that on some P55 boards the video card in the first PCIe slot and the spring clips are very close. Noctua suggests insulating the clips with tubing or electrical tape to prevent any issues.
Now, if you were thinking about adding a third fan, well, don’t. The back of the cooler is so close to the back of the case and the rear fan that it most likely wouldn’t fit.
Next Page - The Legit Reviews Core i7 Test System
Page 1 - The Massive Noctua NH-D14
Page 2 - External Impressions
Page 3 - The NF-P14 Fan
Page 4 - Installing the NH-D14
Page 5 - The Legit Reviews Core i7 Test System
Page 6 - Results
Page 7 - Final Thoughts