Patriot Hellfire M.2 480GB NVMe SSD Review


IOMeter Sequential and 4K Random Performance

IOMeter Sequential Performance

Legit Reviews is once again adding IOMeter v1.1.0 testing to ourSolid-State Drive reviews as we feel that the canned benchmarks no longer show enough of the performance picture nor do they expose many of the heat issues that we are starting to encounter on M.2 PCIe SSDs and sustained write issues on TLC NAND based drives. We start out testing each drive with IOMeter, but first we prepare the drive. This is done by using Parted Magic to complete a full Secure Erase each and every drive. Next we use IOMeter to prefill the drive by performing the industry standard 128KB, aligned, sequential write workload across the entire drive for a period of 30 minutes. Once the drive is conditioned we run our saved sequential test profile that runs our 128KB test for one minute without any idle time in between the tests. The queue depth is set to 32 as we feel with NVMe drives starting to come out that we need to increase our IO depth.


The 128KB Sequential Read/Write test is done primarily to make sure the drives we are testing meet or surpass the manufacturer specifications for sequential Read/Write performance. The Patriot Hellfire M.2 480GB drive is rated at 3GB/s read and 2.4 GB/s write and we were able to get 2.6 GB/s read and 1.3 GB/s write when performing each test for a period of 1 minute.

IOMeter 4K Random Performance


When it comes to 4K Random Read/Write IOPS, the Patriot Hellfire M.2 480GB PCIe SSD is rated at 210,000 IOPS for Random Write and 170,000 IOPS for Random Read. We got 270,000 IOPS for the 4K Random Writes and 238,000 IOPS for the Random Read IOPS and that is well above the specifications. The 80/20 mixed workload test that we ran dropped the performance down to 133,000 IOPS, but it was still a very solid score.