CoolIT Systems Pure CPU Cooler – Water Cooling For Under $100

Jump To:

The CoolIT Pure Water Cooler

CoolIT Pure CPU Cooler

CoolIT Systems Inc. has recently released a new CPU cooler called PURE. It combines facets of air-cooling and liquid cooling with ease of use as the Pure uses all internally installed components. This new cooler is similar to their other coolers as it is a self contained sealed loop, and like other CoolIT coolers, they are mounted internally in place of the rear 120mm case fan. Before we get too into the cooler let’s take quick look at the specifications and features for the PURE CPU cooler.

CPU FHE (Fluid Heat Exchanger)

  • Design: Monolithic copper, multi-cell
  • Dimensions: 43 x 42 x 16.5 mm
  • Surface Area: 4,026mm²
  • Weight: 175g Radiator and Pump Module


  • Design: High performance radiator
  • Dimensions: 157 x 133 x 25mm (HxWxD)
  • Weight: 400g


  • Power usage: 8W +/- 0.5W
  • Design: 12VDC coreless outrunner pump with integrated expansion vessel
  • Noise: <15dBA
  • Life Cycle: 50,000 hrs
  • Dimensions: 50 x 50 x 75 mm
  • Flow: 3.5 L/min
  • Weight: 205g


  • Power Usage: 1.5 Watts max
  • Airflow: 63.5 CFM
  • Noise: 27dBA max
  • Bearing Type: Ball
  • Lifecycle: 100,000 hours
  • Dimensions: 120 x 120 x 25 mm (HxWxD)


CoolIT Systems PURE CPU Cooler

The box: The PURE cooler is shipped well protected; the box is sporting simple graphics that show the cooler and charts with the specifications.

CoolIT Systems PURE CPU Cooler

Out of the box we can see the cooler is held snuggly in place in Styrofoam. The CPU block, however, did not have anything to hold it into its pocket in the Styrofoam. It was loose in the box which resulted in the radiator getting smacked. It’s not bad though — the fins are ok, just some of the paint was knocked off. You will see this in some of the following images.

Jump To:
1 2 3 4 5  Next »

Comments are closed.