Thermaltake Water 2.0 Performer CPU Water Cooler ReviewThu, Jun 07, 2012 - 12:00 AM
Looking closer at the Water 2.0 Performer
Taking a look at the radiator for the Water 2.0 Performer,
it seems like a pretty standard 120mm water cooling radiator.
This is the pump and waterblock for the Water 2.0 Performer.
You can see that it has a standard 3 pin connector, for connecting to your
motherboard’s fan header. You can also get a glimpse of the mounting notches
that the Water 2.0 Performer uses.
Here is a look at exactly how tall the pump/waterblock combo
is. Without the plastic cap protecting the base of the water block, it would be
right at the same size as the included 120mm fans, which are 25mm thick.
The base on the water block is flat, and comes with
pre-applied thermal paste.
Included are two 120mm fans, both of which feature a PWM 4