ADATA today announced the launch of the enterprise grade SX1000L solid state drive (SSD). While the company is well-established in the consumer SSD market, this is ADATA’s first offering specifically tailored towards server applications.

ADATA SX1000L SSD

Taking advantage of its expertise in NAND flash memory technology, ADATA is emphasizing the reliability and performance of the SX1000L. It employs static wear-leveling technology to maximize device mean time between failures (MTBF) to 1,500,000 hours, providing the long-term dependability required by high density computing and heavy load server operations. Available in 2.5” standard SATA form factor, the SX1000L implements advanced controller technology to enhance read/write performance. Sequential read speeds reach 560 MB/sec, and sequential write is as high as 340 MB/sec, with IOPS of 73,000 and 45,000 (Maximum 4K random read and write, respectively).

Capacity 100GB/200GB 
Form Factor SATA III 6Gb/sec
NAND Flash Multi-Level Cell (MLC) NAND Flash Memory with enhanced NAND sorting methodology 
Controller LSI SandForce SF-2281 
Dimensions 100.25 x 70.1 x 7.0 mm (L x W x H) 
Weight 61 ±1g
Interface SATA 6Gb/sec
Performance(Max)  
Sequential Read: 560 MB/sec
Sequential Write: 340 MB/sec
IOPS: 73,000 (Maximum 4K Random Read)
IOPS: 45,000 (Maximum 4K Random Write)
 
Power Consumption 0.35W Idle/0.6W Active 
Operating temperature 0 °C - 70 °C
Storage temperature -40 °C - 85 °C
Shock resistance 1500G/0.5ms
MTBF 1,500,000 Hours
ECC Recovery

Up to 55 bits correctable per 512-byte sector (BCH)

 

*varies depending on exact configuration