Plextor M2 Series 128GB SATA 6Gbps Marvell SSD Review

Jump To:


ATTO & Iometer Synthetic Benchmarks

ATTO v2.41

ATTO is one of the oldest drive benchmarks still being used today and is still very relevant in the SSD world. ATTO measures transfers across a specific volume length. It measures raw transfer rates for both reads and writes and places the data into graphs that can be very easily interpreted. The test was run with the default runs of 0.5kb through 8192kb transfer sizes with the total length being 256mb.

ATTO – Intel P67 Platform

Plextor M2 Series ATTO SATA III SANDY BRIDGE

Benchmark Results: On the Plextor M2 Series 128GB drive the reads far outpace the writes once file sizes exceed 8 KB. Top speeds are just about dead on the Plextor specifications although behind where many of the SATA 3Gbps drives scored.

Plextor M2 Series ATTO GRID

Iometer 2008 (1.1.0)

Iometer is an I/O subsystem measurement and characterization tool for single and clustered systems. It was originally developed by the Intel Corporation who has since discontinued work on Iometer and it was ultimately turned over to the Open Source Development Lab (OSDL). We chose the file sizes that best reflect many of the Windows transactions. 4KB random read/writes is very common on every day user machines. Large sequential writes represent large file copies. The drive block size is 512kb so it should give a very good indication of peak performance. We set the queue depth to 4 for the tests as generally Windows operations tend to happen at queue depths of 5 or less.

Plextor M2 Series Iometer Chart

Plextor M2 Series Iometer Chart

Benchmark Results: Again the reads are far superior to the writes and neither can keep pace with the Vertex 3 drives.

Print
Jump To:

Comments are closed.