EVGA nForce 680i SLI 775 A1 Motherboard Review

Jump To:


Overclocking Results

Overclocking on the EVGA board was one of the best experiences I have had in overclocking in a good while.  It was easy and straight forward, and yielded some great results.  As we usually do, we started out with the high overclock that we could get with the default multiplier of 9x on our Intel e6600.  We also set the vcore up to 1.5v as actually read in the bios (not the actual setting, it was 1.537v).  We unlinked the CPU and the DDR and let her fly and this is what we got…

That’s right folks!  A new high for our little CPU!  403MHz FSB is a great accomplishment!  Overclocking on this board is absolutely fantastic with the default multiplier!

Print
Jump To:

Comments are closed.