Legit Memory Reviews
1GB Kit HyperX DDR 434MHz
|Product:||Kingston HyperX PC-3500 Modules (512mb)|
|Date:||Sat, Jul 26, 2003 - 12:00 AM|
|Written By:||Nathan Kirsch -|
Benchmarks & Performance:
Intel Test Results:
Our Test System:
- Intel Pentium 4 3.0C 800MHz FSB (Intel ES unlocked Sample)
- ABIT IC7-G Canterwood Motherboard
- Thermalright SLK-900U w/80cfm Delta (Air Cooled)
- MSI Geforce 4 Ti-4800 128mb 8x AGP
- Seagate 120Gb Serial ATA 150 Hard drive
- Antec TrueControl 550W Power Supply
- ViewSonic E90fb Monitor
- BeanTech Igloo8 Aluminum Case
- NVIDIA Detonator 43.45
- Intel Chipset Software Utility 5.00.1012
- Intel Application Accelerator v2.3
- ABIT IC7-G BIOS "15"
All testing was done on a fresh install of Windows XP Professional build 2600 with Service Pack 1A. All benchmarks were completed on the desktop with no other software programs running. No overclocking was done on the video card. Nvidia 43.45 drivers were used on all motherboards for this review. Our testing processor was an unlocked Intel Pentium 4 3.0C. Our default testing was done at 200x15 = 3.0GHz. We did disable the audio and firewire features found in the BIOS menu.
Now that you have the basic understanding of all the general test set-up, let's move on to the Testing!
Results: It is really obvious that agressive memory timings paired with ABIT's "Game Acceleration Technology" is the way to go when looking for peak performance. We found a fairly large performance increase by just tweaking the memory settings via ABIT's SoftMenu BIOS. The pair of 256mb Corsair XMS 3500 modules provided very close results even though they offer half the capicty of the pair of 512mb Kingston HyperX 3500 modules.
Now that I have seen the results, we will look at overclocking and sum up my overall impression of our Kingston HyperX module!
Next Page - Overclocking:
Page 1 - Introduction:
Page 2 - Features:
Page 3 - Benchmarks & Performance:
Page 4 - Overclocking: