Legit Case Reviews
MSI Barricade Mid Tower PC Case Review
|Date:||Fri, Aug 03, 2012 - 12:00 AM|
|Written By:||Raymond Buckland -|
Barricade Computer Installation
Time for me to go ahead and start installing my computer components into the Barricade chassis and see if it is big enough to handle a moderately sized computer system.
So far the Barricade chassis is more than capable of handling moderately sized computer components. I have not run into any major fitting problems with the motherboard or the PSU.
The HDD carriers also use a tool-less design to them. Installation was pretty straight forward, just slightly bend one side of the carrier away from the HDD and slide in the HDD into the carrier and let go of the HDD carrier.
It almost looks like the HDD carriers are too small for the 3.5” HDD's.
Installation of the smaller 2.5" HDD/SSD's in to the Barricade chassis is pretty straight forward as well. Just need to align the center holes to the HDD/SSD and find the proper screws and secure it to the carrier.
As I said on the previous page, we have the option of mounting 80/90mm fans to the carriers to help keep our drives cool. But if you wish to use a fan on these drive carriers, you will lose a lower drive carrier in the process due to the fan thickness.
Looking at the backside of the motherboard tray with all of the computer components installed into the Barricade chassis.
This is where things got interesting for me when I was trying to install the right side panel onto this chassis. As I feared, the right side panel did not have a large enough of an outward form in it to allow me to close that side panel without me having to put a lot of pressure on the right side panel to close it. MSI should have put an extra 3/8"- 1/2" more room back here to make hiding the PSU power cables easier while installing the right side panel.
The CPU cut out is large enough to handle various types of and designs of motherboards.
If you are going to be using a non-modular PSU, you will not be able to install the bottom 120mm fan here.
Even after fighting the right side panel to go back on with all of the PSU wires, I still managed a pretty clean look to the interior of the Barricade chassis. If I would have used one of my non modular PSU's, I would have been in trouble.
What the MSI Barricade mid tower chassis looks like running at night.
Next Page - MSI Barricade Final Thoughts
Page 1 - The MSI Barricade Chassis
Page 2 - Unboxing the Barricade
Page 3 - Barricade Exteriror Thoughts
Page 4 - Barricade Interior Thoughts
Page 5 - Barricade Computer Installation
Page 6 - MSI Barricade Final Thoughts