Legit Case Reviews
Fractal Design Arc Midi Black Case Review
| Manufacturer: | Fractal Design |
| Product: | Fracal Design Arc Midi Case FD-CA-ARC-BL |
| Date: | Tue, Dec 27, 2011 - 12:00 AM |
| Written By: | Bryon Blofstein - |
| Share: |
Installing PC Hardware
Well, now the real fun begins. I have an AMD AM3+ motherboard I will install. In addition I will install an NVIDIA GeForce 460 GTX video card. A modular power supply will round out the install.
The Motherboard installs easily. The I/O plate for the motherboard fits fine. I had to screw in the preset screws for the motherboard. As you can see from the photograph, there is a good amount of room to work with in the mid-tower.

Next installed are the video card and fan controllers. The Nvidia card fits with plenty of room to spare. There is still a good amount of space to route the six pin power connectors to the card. SLI and Crossfire can easily be done with the space in the Arc Midi.
The fan controller is also a nice touch. It fits perfectly in the vertical slot on the back of the machine. There are three, three pin connectors to connect to the fans that are already installed in the case. A molex power connector remains to power the three fans.

The initial wiring in the case was routed very well through the rubber cut outs. As shown in the photograph below, there is plenty of room for more cable management. All locations on this case can easily be managed through the built in wire management ports.


Next Page - Final Thoughts and Conclusion
| Review Index |
|
Page 1 - The Fractal Design Arc Midi
Page 2 - Retail Box & Packaging Page 3 - Exterior Thoughts Page 4 - Interior Thoughts Page 5 - Installing PC Hardware Page 6 - Final Thoughts and Conclusion |
Socialize