Legit Power Supply Reviews
Thermaltake Dr. Power II ATX Power Supply Tester Review
|Product:||Dr. Power II Univeral ATX PSU Tester - AC0015|
|Date:||Wed, Nov 02, 2011 - 12:00 AM|
|Written By:||Jeremy Borage -|
Using the Thermaltake Dr.Power II PSU Tester
We first plugged the Dr.Power II into a Thermaltake 750W Toughpower PSU that we think is working fine. We attached the 24 pin, PCI-express, 8 pin CPU, and molex connectors. Once these connectors are plugged in, the screen lights up and indicates which connectors are present.
Pressing the main button on the Dr. Power II turns the PSU on and begins the manual mode test by starting with the 24 pin connector.
The screen remained blue, showing us that all of the voltages are within spec. It also shows us the PG Value of 300ms, which is within spec. Thermaltake indicates the product introduces resistance in order to simulate a load, so the product may get warm during testing. Since we are in manual testing mode, we have to press the button to move the test to the next connector, which happens to be the PCI-Express connection. Again, we see the Thermaltake Toughpower 750W PSU is dead on.
Next, the tester moves to the 8 pin CPU connection, and again we see the Toughpower coming through cleanly.
Finally, the molex connection test confirms that this PSU is good enough to pass all tests.
Next, we connected a BFG 800W PSU that has given us issues in the past. We wanted to see whether the Dr. Power II would find any problems with it.
Upon pressing the operating button on the device, the screen instantly turned red, indicating a failed test.
Interestingly, the Dr. Power II didn't even turn the PSU on. The last time we tried this PSU in a PC, it would turn on successfully, however under load it was not stable. So, we give Thermaltake credit for properly detecting a power supply that wasn't operating properly.
Final Thoughts & Conclusion
The Thermaltake Dr.Power II universal ATX power supply tester is an easy to use, quick device that does help diagnose PC problems. This product could be a major time saver for somebody who has to maintain a lot of PCs in an IT department or for somebody in a PC repair business. It comes with a 3 year warranty and is affordable at a price of only $39.99 shipped from Amazon. For us, it properly detected a troublesome PSU and passed a PSU that appears to be working correctly.
Legit Bottom Line: The Thermaltake Dr. Power II is a valuable tool for any PC enthusiast or anyone else who wants to quickly and easily diagnose PC problems.
Questions or Comments? View this thread in our forums!
Page 1 - Thermaltake Dr. Power II Power Supply Tester
Page 2 - Using the Thermaltake Dr.Power II PSU Tester