Legit Storage Reviews
OCZ Vertex 2 100GB SandForce SF-1200 SSD Review
|Date:||Fri, May 14, 2010 - 12:00 AM|
|Written By:||Nathan Kirsch -|
HD Tach v184.108.40.206
HD Tach is a low level hardware benchmark for random access read/write storage devices such as hard drives, removable drives (ZIP/JAZZ), flash devices, and RAID arrays. HD Tach uses custom device drivers and other low level Windows interfaces to bypass as many layers of software as possible and get as close to the physical performance of the device possible.
Benchmark Results: The OCZ Vertex LE 100GB SSD was able to reach 245MB/s read and 204MB/s write. The random access time and CPU utilization were really low, which is what we like to see on SSDs.
Comparison Chart: The OCZ Vertex 2 100GB and Vertex 2 LE 100GB SSDs were nearly identical in performance as they use the same brand of controller. All of the drives were benchmarked on the Marvell SATA 6Gbps controller in order for the testing to be fair in all of the benchmarks as some of the drives run on a SATA III interface. The random access times for all of the drives were 0.1 ms or lower, so nothing significant to see there.
Next Page - HD Tune v4.01
Page 1 - OCZ Vertex 2 SSD Performance Review
Page 2 - Inside the Vertex 2 SSD
Page 3 - The OCZ Toolbox Utility v0.60
Page 4 - The Test System
Page 5 - HD Tach v220.127.116.11
Page 6 - HD Tune v4.01
Page 7 - HD Tune v4.01 - Random Access
Page 8 - ATTO Disk Benchmark v2.41
Page 9 - SiSoftware Sandra 2010
Page 10 - CrystalDiskMark v3.0
Page 11 - AS SSD Benchmark
Page 12 - PCMark Vantage
Page 13 - IOMeter
Page 14 - Free Capacity and Final Thoughts